Panasonic Viera TX-L32D26BA Operating Instructions Manual

Also see for TXL42D26B: Service manual

Contents

Panasonic Viera TX-L32D26BA Operating Instructions Manual Manual pdf 86 page image

86Q-LinkPreparations■ Connect the DVD Recorder / VCR with the following logos:●“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic” or “SMARTLINK”Q-Link connection● p. 84Use fully wired SCART cable.●Set up the DVD Recorder / VCR. Read the manual of the recorder.●Q-Link terminal setup in the Setup Menu● “Q-Link” (p. 34), “AV1 / AV2 out” (p. 34)Download Analogue channel setting● “Analogue channel download” (see below)Features available■Analogue channel downloadAnalogue channel settings can be downloaded to a recorder with an analogue tuner (where Analogueis still broadcast). Digital channel settings are not downloaded.To download the Analogue channel settings● “Q-Link Download” (p. 34) or “Auto Setup” in Analogue mode(p. 41) or “Auto Setup” - when first using the TV (p. 12)Direct TV Recording - What you see is What you recordRecording the current programme on a DVD Recorder / VCR immediately.EXITGUIDEDIRECT TV REC DIRECT TV RECAvailable conditions:● Picture source Mode Recording fromAnalogue TV TV monitor outAV Recorder’s tunerfreesat, DVB, Other Sat. TV TV monitor outAV( watching recorder’s tuner) AV Recorder’s tunerAV( watching recorder’s external input) AV Recorder’sexternal inputAV( watching TV’s external input) AV TV monitor outWhen Direct TV Recording is performed, the recorder is automatically●turned on if it is in Standby mode.Changing channel or turning off the TV is available while the recorder is●recording from its own tuner.Changing channel is not available while the recorder is recording from●the TV tuner.To stop recording■ Unlock the tunerGUIDEUnlockContinueTuner LockedPress EXIT to unlock and stop recordingEXITPower on link and Easy playbackWhen the DVD Recorder / VCR starts playback or the direct navigator / function menu for theequipment is activated, the TV is turned on and the input mode is switched automatically so that youcan view the content. (Only when the TV is in Standby mode.)Power off linkWhen the TV is set to Standby mode, the recorder is also automatically set to Standby. (Only whenthe videocassette or disc is not active.)This function will work even if the TV enters Standby mode automatically by auto power standby function.●“DATA LOGIC” (a trademark of Metz Corporation)•“Easy Link” (a trademark of Philips Corporation)•“Megalogic” (a trademark of Grundig Corporation)•“SMARTLINK” (a trademark of Sony Corporation)•NoteSome recorders are not compatible. Read the manual of the recorder.●Link Functions (Q-LinkVIERA Link)