Panasonic Viera TX-L32D26BA Operating Instructions Manual

Also see for TXL42D26B: Service manual

Contents

Panasonic Viera TX-L32D26BA Operating Instructions Manual Manual pdf 18 page image

18Watching TVDisplay subtitlesfreesat, DVB or Other Sat. mode■Display / hide subtitles (if available)To change the language for DVB (if available)● “Preferred Subtitles” (p. 35)STTLAnalogue mode■Display subtitlesTo hide subtitles● EXITSTTLNoteThis is the same as switching to Analogue teletext service and selecting “P888” (subtitle service). (p. 27)●You cannot change the channel when this function is active.●AspectChange the aspect ratio (image size) ASPECTEnjoy viewing the image at its optimum size and aspect.Programmes usually contain an Aspect Control Signal (Widescreen signal, etc.), and the TV will choose theaspect ratio automatically according to the Aspect Control Signal (p. 94).If you would like to change the aspect ratio manually■Display Aspect Selection list While the list is displayed, select the modeASPECTSelectChange EXITRETURNAspect SelectionAuto16:914:94:3Zoom1Zoom2Zoom3Aspect Selection liststoreselectTo change the mode using the ASPECT button only● ASPECT (Press repeatedly until you reach the desired mode)AutoThe best ratio is chosen and the image expanded to fill the screen.For details p. 9416:9 Zoom1Directly displays the image at 16:9without distortion (anamorphic).Displays a 16:9 letterbox or 4:3 imagewithout distortion.14:9 Zoom2Displays the image at the standard 14:9without distortion.Displays a 16:9 letterbox (anamorphic)image full-screen without distortion.4:3 Zoom3Displays the image at the standard 4:3without distortion.Displays a 2.35:1 letterbox (anamorphic)image full-screen without distortion.At 16:9, displays the image at its maximum(with slight enlargement).NoteAspect is fixed to “16:9” when “Viewing Mode” is set to “Game” in the Picture Menu.●Only “16:9” and “4:3” are available in PC input mode.●Not available when the subtitle function is active.●Not available in teletext service.●Aspect mode can be memorized separately for SD (Standard definition) and HD (High definition) signals.●Other useful functions■