Panasonic Viera TC-L47WT50 Quick Setup Manual

Also see for Viera TC-L47WT50: Owner's manual Manual de usuario

Contents

Panasonic Viera TC-L47WT50 Quick Setup Manual Manual pdf 9 page image

9AccessoriesAssembly screws Bracket (1) Cover (1) Base (1)TBL5ZA32771 TBL5ZB32331 TBL5ZX04001XSS5+15FNK(black)size (M5 x 15) (4)XYN4+F10FJK(black)size (M4 x 10) (4)XYN4+F10FN(silver)size (M4 x 10) (2)(included with Cover)■Preparation for assembly ■Assembling the pedestalUnpack the pedestal and the TV, turn them so that theirfront surfaces face down, and put them on a blanket orsuch other cloth spread out on a workbench or desk.Turn the front side of package to the workbench whenunpacking the TV.Choose a stable workbench that is larger than the TVand use a clean blanket or cloth that has no dirt orforeign matter on it.Do not hold the LCD panel when holding the TV.Be careful not to scratch or damage the TV.Attach the Bracket to the protrusion of Neck.Make sure that the bracket is anchored before fixing thescrews.Fix securely with assembly screws (4 screws)ABracketFrontBaseHold thebracketnot to fall overProtrusion of Neck (top)■Set-upAttach the pedestalBack of the TVAlign the three tabson the bracket withthe grooves on theback of the TV andinsert them.Check that the centertab is in the hole, andthen slide in the bracketso that the arrow (↓) onthe back of the TV isaligned with the arrow(↑) on the bracket.Tighten assemblyscrews (total 4screws) loosely atfirst, then tighten themfirmly to fix securely.tabAttach the bracket coverAttach the bracket cover and fix securelywith assembly screw (total 2 screws).Tighten screws firmly.Set the pedestal● As shown in the figure, two people should hold the specified portions ofthe TV, raise and set up the TV.Hold hereCoverBack of the TVAttaching the pedestal to TVTwo people are always required for attachment.