Panasonic Viera TC-L47WT50 Quick Setup Manual

Also see for Viera TC-L47WT50: Owner's manual Manual de usuario

Contents

Panasonic Viera TC-L47WT50 Quick Setup Manual Manual pdf 17 page image

17First Time SetuporTurn the TV on with the POWER buttonor(Remote)(TV)Setup the following items● Select your language● Select your country● Select your viewing mode (Be sure to select “Home Use”)If you select “Store Demonstration” by mistake, confirmation screen will be displayed.To display the “Set viewing mode” screen again and select “Home Use”, do one ofthe following:• Press and hold down the rear POWER button for at least five seconds.• Unplug power cord for 30 seconds and plug in again.● ANT/Cable setupSelect and set the settings according to your ANT/Cable environment.Select “Yes” on the confirmation screen, to start the scanning process.After scanning is finished completely, press OK to continue.● Label the inputs for easy identificationTo name each input, follow the instructions on screen.When this is done, select NEXT and press OK to go to the next step.● Configure Network settingsSelect the Network type and select the setting mode.If you select “Wireless (WiFi)”, start “Wireless network settings”.Select “Automatic” or set “Manual” setting, start connection test.When you complete “Network settings” successfully, the completion screen will be displayed.● Adjust the ClockSelect the clock mode and set other settings.When “Auto” is selected, clock will be set automatically according to Time zone and DST.● Pair the Touch Pad ControllerTo pair the Touch Pad Controller, hold the touch pad within 1.6 feet (50 cm) of theTV and simultaneously press and hold the Right button and INTERNET button onthe Touch Pad Controller following the instructions on screen.Then, follow the instructions on screen to complete the pairing.When you complete this setting successfully, the completion message will be displayed.It also displays some operation methods such as Tap, Swipe and Trace the fringeto scroll, etc.Tap (or press OK) to continue to next step.• To repeat these settings: Setup -> VIERA Touch Pad settingsComplete First time setupCompletion screen is displayed.You can repeat the First time setup• Press MENU --> Setup --> First time setupTo watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR,gaming device, etc.), press the INPUT button and select the appropriate input.Panasonic does not guarantee operation and performance of peripheral devicesmade by other manufacturers; and we disclaim any liability or damage arising fromoperation and/or performance from usage of such other maker’s peripheral devices.The first time setup screen is displayed only when the TV is turned on for the first time, after the power cordis inserted into a wall outlet and the “Auto power on” is set to “No”.(Press MENU --> Setup --> Advanced setup -->Auto power on)