Panasonic Viera TC-L42D30L Operating Instructions Manual

Panasonic Viera TC-L42D30L Operating Instructions Manual Manual pdf 69 page image

Technical Information69HDMI connectionHDMI (high-definition multimedia interface) is the world’s first complete digital consumer AV interfacecomplying with a non-compression standard.HDMI allows you to enjoy high-definition digital images and high-quality sound by connecting the TVand the equipment.HDMI-compatible equipment∗1 with an HDMI or DVI output terminal, such as a DVD player, a set top box orgame equipment, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.About connections, see “External Equipment” (p. 65 - 67).Applicable HDMI features• Input audio signal: 2ch Linear PCM (sampling frequencies - 48 kHz, 44.1 kHz, 32 kHz)• Input video signal: 480i, 480p, 720p, 1080i and 1080p“Input signal that can be displayed” (p. 70)Match the output setting of the digital equipment.• Input PC signal : “Input signal that can be displayed” (p. 70)Match the output setting of the PC.• VIERA Link (HDAVI Control 5): [VIERA Link] (p. 61)• Audio Return Channel∗2 (HDMI1 terminal only)DVI connectionIf the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMIadaptor cable∗3 . When the DVI to HDMI adaptor cable is used, connect the audio cable to the audioinput terminal (HDMI1 / 2: use AV1 audio terminals).Note• Audio settings can be made on the [HDMI1 / 2 / 3 / 4 Input] in the Sound Menu. (p. 30)• If the connected equipment has an aspect adjustment function, set the aspect ratio to [16:9].• These HDMI connectors are “type A”.• These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection)copyright protection.• Equipment having no digital output terminal may be connected to the input terminal of “COMPONENT(Y, PB/C B, PR /CR )” or “VIDEO” to receive analogue signals.• This TV incorporates HDMI™ technology.∗1: The HDMI logo is displayed on HDMI-compliant equipment.∗2: Audio Return Channel (ARC) is a function to be able to send digital sound signals via an HDMI cable.∗3: Enquire at your local digital equipment retailer shop.PC connectionA PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.• PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanningfrequency 59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).• A PC adaptor is not necessary for the DOS/V-compliant D-sub 15-pin connector.Note• Some PC models cannot be connected to this TV.• When using PC, set the colour display quality of PC to the highest position.• For details of the applicable PC signals, see p. 70.• Max. display resolutionAspect 4:3 1,440 × 1,080 pixels16:9 1,920 × 1,080 pixels• D-sub 15-pin connector signalPin No. Signal Name Pin No. Signal Name Pin No. Signal NameR GND (Ground) NC (not connected)G GND (Ground) NC (not connected)B GND (Ground) HDNC (not connected) NC (not connected) VDGND (Ground) GND (Ground) NC (not connected)