Watching TV17Watching TVTVOPTIONPOWERR BCHMENUASPECTEXITINFOTVSTILLghi mnotuvpqrs wxyzabc defjk lLASTOFF TIMERSAP• When the TV isswitched to standby,there will be a clickingsound after a shortdelay. This is normal.1 Turn power on■ VIERA Connect banner appearsYou can access to VIERA Connect and enjoy thevarious contents.• To remove this banner, leave for about 5 secondsor press any buttons (except the buttons to accessVIERA Connect).• To set this banner display off[VIERA Connect Banner] (p. 32)2 Select Digital TV or Analogue TV modeDigital TV05.1Globo HDCoronation Street20:00 - 20:55CC Text SAP20:3545NowAll Digital ChannelsInformation banner appearswhenever you select a channel• For details (p. 18)The selected mode is displayed.• It is also possible to select themode pressing the TV buttonrepeatedly on the side panel of theTV. (p. 10)• If you use an RF selector, switchit whenever you switch betweenDigital TV and Analogue TV mode.3 Select a channelCHupdown or jk lghi mnotuvpqrs wxyzabc def• To select the two or three-digitchannel number, e.g. 112abc (in a short time)• If one or two-digit channel number,e.g. 39def wxyz(quickly changes the channel)■ To select from the Channel ListAll Digital ChannelsCartoon NwkBBC Radio WalesBBC Radio CymruBBC ONE WalesBBC THREEBBCiCBBC Channel05.105.205.305.405.505.605.7watchselect channelOther useful functionsDisplay the SUB MENU listen with SAP (Secondary Audio Programme)Selects Audio mode for watching TVDigital TV modeSwitch the audio signal (if available).(Audio 1 / Audio 2 / Audio n …)Analogue TV modeSelect the desired audio mode.(Stereo / SAP / Mono)