Panasonic Viera TC-L42D30L Operating Instructions Manual

Panasonic Viera TC-L42D30L Operating Instructions Manual Manual pdf 64 page image

VIERA Link Functions64[Speaker Selection] - Speaker controlYou can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver.• If you cannot operate, check the settings and the equipment“Summary of features”, “Connection”, “Preparations” (p. 61 - 62)Access and control the speaker volumeTVMUTEVOL1 Display [VIERA Link Menu]2 Select [Speaker Selection]VIERA Link MenuVIERA Link ControlSpeaker Selection Home CinemaRecorderaccessselect3 Set to [Home Cinema] or [TV]access / storeselect[Home Cinema]Player theatre, Blu-ray Disc theatre or Amplifier will be automaticallyturned on if it is in Standby mode and the sound is from theatre speakersconnected to the equipment.• Volume up / down VOL• Mute• The sound of TV speakers is mute.• When the equipment is turned off, TV speakers will be active.[TV]TV speakers are active.Multi-channel sound• If you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch)via an Amplifier, connect with HDMI cable and Optical digital audiocable (p. 61), and then select [Home Cinema]. If your Amplifier has“HDAVI Control 5” function, you can connect only with HDMI cable. In thiscase, connect your Amplifier to the TV’s HDMI1 terminal.Note• These functions may not work properly depending on the connected equipment.• Image or sound may not be available for the first few seconds when the Input mode is switched.• Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre orAmplifier. Read the manual of the equipment.• “HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Controlcompatible equipment. This standard is compatible with conventional HDAVI equipment.• To confirm this TV’s version of HDAVI Control [System Information] (p. 33)