Safety Precautions | Notes5CautionThis appliance is intended for use in tropical climatesWhen cleaning the TV, remove the mains plug• Cleaning an energised TV may cause electrical shock.When the TV is not going to be used for a long period of time, remove the mains plug• This TV will still consume some power even in the Off mode, as long as the mains plug is stillconnected to a live socket outlet.Transport only in upright positionAllow sufficient space around the TV for radiated heatMinimum distance101010 10(cm)• When using the pedestal, keep the space between the bottom of the TVand the surface where the TV is set.• If using a Wall-hanging bracket, refer to its manual.Do not block the rear air vents• Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electricalshock.Do not apply strong force or impact to the display panel• This may cause damage resulting in injury.NotesAuto power standby function• The TV will automatically go into Standby mode in the following conditions:• no signal is received and no operation is performed for 30 minutes in Analogue TV mode• [Off Timer] is active in the Timer Menu (p. 19)• no operation is performed for the period selected in [Auto Standby] (p. 30)Keep the TV away from these types of equipment• Electronic equipmentIn particular, do not place video equipment near the TV. Electromagnetic interference may distortimages / sound.• Equipment with an infrared sensorThis TV also emits infrared rays. This may affect operation of other equipment.When you insert the main plug into the socket outlet, the TV is in the samecondition as the last time you pulled the plug out as follows.• Last time: TV off (Standby Mode) the TV will be in the standby mode.• Last time: TV on the TV will be turned on (skip the Standby Mode)