Panasonic Viera TC-L42D30L Operating Instructions Manual

Panasonic Viera TC-L42D30L Operating Instructions Manual Manual pdf 28 page image

How to Use the Menu Functions28Advanced SettingsResolutionEnhancer• Off• Mid• MaxEnhances the picture resolution to make the image sharper• This function is available for SD (Standard definition) signal.• As for HD (High definition) signal, this function is available when aspectmode is set to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or[Zoom].• Not valid on VIERA Connect and Media Player16:9 Overscan• Off• On[On]: Default - Image is overscanned by ~5% beyond the edge of thescreen to hide edge video noise[Off]: Displays image in its original size including edge video noise suchas lines, dashes, dots etc.• Applicable for video signals when TV aspect is set to [16:9]• Memorised separately for SD and HD channels / signalsH-Size• Normal• ExtendedSwitches over horizontal scanning sizeColour Matrix• SD• HDAvailable only with 480p input on video signals in a natural colour fromdigital equipment connected to AV1 component (Y, P B /C B, PR /CR ) orHDMI1 / HDMI2 / HDMI3 terminals. Select [SD] or [HD] to adjust suitablecolour parameters for [SD] (standard definition) or [HD] (high definition)• [SD]: Input signal is a normal TV system• [HD]: Input signal is a high definition systemDVI Input Setting• Normal• FullChanges the black level in the image for HDMI input mode with DVI inputsignal manually• When the DVI input signal from the external equipment, especially fromPC, is displayed, the black level may not be suitable. In this case, select[Full].• The black level for HDMI input signal will be adjusted automatically.• For HDMI input mode with DVI input signal onlyLock SettingsLocks for each Viewing Mode and input.Additionally, [Backlight], [Contrast], [Brightness], [Colour], [Sharpness],[Tint], and [Reset to Defaults] in the Picture Menu can be locked for[Professional1] and [Professional2].• Make a note of the PIN number in case you forget it.Copy AdjustmentYou can copy the selected [Professional1] or [Professional2] settings tothat of the other input.The settings of [Contrast], [Brightness], [Colour], [Sharpness], [Tint] and[Advanced Settings] will be copied.• You cannot copy to the locked mode.Reset to Defaults Press the OK button to reset the present Picture Viewing Mode of theselected input to the default settings∗1 : Only when [Advance(isfccc)] is [ON] and [Lock Settings] is [Off]∗2 : Only when [Viewing Mode] is [Professional1 (isf Day)] or [Professional2 (isf Night)] and [LockSettings] is [Off]∗3 : Only when [Lock Settings] is [Off]