Panasonic Viera TC-L42D30L Operating Instructions Manual

Panasonic Viera TC-L42D30L Operating Instructions Manual Manual pdf 14 page image

Auto Tuning14Setup the network connectionSet up the network connection to enable the network service functions such as VIERA Connect, etc.(p. 16, 60)• To set up the wireless connection, the Wireless LAN Adaptor is required.• Please note that this TV does not support wireless public access points.• Ensure the network connections and network environment are completed before starting setup.1 Connect the LAN cable or Wireless LAN AdaptorTo enable the network service functions (VIERA Connect, etc.), you need to connect the TV to abroadband network environment.InternetenvironmentInternetenvironmentWired connectionWireless connectionAccess pointLAN cable (Shielded)• Use the Shielded Twist Pair (STP) LAN cable.Wireless LAN Adaptor andExtension cable“Optional accessories” (p. 8)• Connect to the USB 1, 2 or 3 port.Rear of the TVor• If you do not have any broadband network services, please consult your retailer for assistance.• For more information of the network connections (p. 52)2 Select [Wired] or [Wireless]Network SetupSelect Wired or WirelessWired Wireless Set later accessselect3 Start the settings■ [Wired]Select [Auto]Acquire IP AddressAuto Manualaccessselect• To set manually, select [Manual] andset each item. For details (p. 54)Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection TestAutomatically setup is done and the test of thenetwork connection starts.: succeededThe test is successful and the TV isconnected to the network.: failedCheck the settings and connections, andthen select [Retry]