Panasonic Viera TC-65PST34 Owner's Manual

Also see for Viera TC-65PST34: Owner's manual

Panasonic Viera TC-65PST34 Owner's Manual Manual pdf 9 page image

9Getting started Accessories/Optional AccessoriesAccessoriesAssembly screwsATHEL093Jsize (M5 x 30) (Black) (6)BXYN6+F25FJKsize (M6 x 25) (Black) (4)Poles (2)Base (1)Allen wrenchCAttaching the pedestal to TV■Assembling the pedestalACFix securely with assembly screws A (Total 6 screws).Tighten screws firmly using Allen wrench C .Front■Set-upCarry out work on a horizontal and level surface.Tighten assembly screws B (total 4 screws) loosely at first,then tighten them firmly to fix securely.BRear sideArrowmarkHole for pedestalinstallationPoleBaseBottom viewArrowmarkRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wallhanging bracket or repacking the TV.Remove the assembly screws B from the TV.Pull out the TV from the pedestal.Remove the assembly screws A from the pole.WarningDo not disassemble or modify the pedestal.Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.Otherwise the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure.(above)Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.