38Using Network servicesNetwork ConnectionsContact your Broadband service providerNOTICE: If you don’t have Internet service by your local provider, please order a high-speed Internet service atno less than the following connection speed. If you already have such service, make sure that the connectionspeed exceeds the following.● Required speed (effective): at least 1.5 Mbps for SD and 6 Mbps for HD picture quality, respectively.● Dial-up Internet service cannot be used for VIERA Connect.Select wired or wireless connectionIf the Cable/DSL modem is close to the TV and you have only one TV set, you may choose a wired connection.If the Cable/DSL modem is far from the TV and/or you have more TVs in the house, you may want to use awireless network.Connecting to the InternetWired connection (Directly connected)If you are not using the network for connecting anything else but the TV, you could just connect the TVdirectly to the Cable/DSL Ethernet connection.Wired connection (Using Router)If you are using the network for connecting various equipment and want to connect the TV, you should use arouter to connect the TV to the InternetWireless connectionIf you are using the network for connecting various equipment and want to connect the TV, you could alsouse a Wireless LAN Adapter and Access point to connect the TV to the InternetInternetInternetABCLAN cableLAN cable■ Setup WirelessLAN AdapterInsert straight inBack of the TVBack of the TVModemModemHub, RouterorAccess pointNetworkcameraEnsure to use a LAN straightcable for this connection.● To use only Network camera, you can operate the features without Broadband network environment.Network cameraLAN cableEnsure to use a LAN crosscable for this connection.Back of the TV