Panasonic VL1700 Feature Manual

Panasonic VL1700 Feature Manual Manual pdf 40 page image

• The most recent 30 days of DSP usage is recorded.• The scale of the graph can be set to 1-hour, 4-hour, or 24-hour intervals.• The maximum value of the vertical axis is the maximum recorded DSP usage value, and not the availableDSP resource capacity.• To view the number of times DSP resources are measured as busy, see Counting of DSP busy times.• The state of DSP resource usage can be outputted as a CSV file by clicking Export.PC Programming Manual References9.2 Control Box Configuration—[1-1] Configuration—Slot—System Property—Main—DSP CODEC G.711only (SIP extension)9.8 Control Box Configuration—[1-5] Configuration—DSP ResourceFeature Manual References3.2 System and Subscriber Features4.2.1 SIP (Session Initiation Protocol) Extension4.4.3 Automatic Time AdjustmentDescriptionIt is possible to adjust the Control Box's clock automatically in the following two ways:a. Summer Time (Daylight Saving Time) Setting:The start and end dates of the summer time can be programmed. The clock will be adjusted (one hourforward or backward) at 2:00 AM of the programmed date, if enabled through system programming. Itmeans 2:00 AM will become 3:00 AM on the start date of the summer time, and 2:00 AM will become1:00 AM on the end date.b. Time Information through Network Time Protocol (NTP):By connecting the Control Box to an NTP server, it is possible to receive and update the time setting.The clock will be adjusted every day at 3:05 AM, if enabled through system programming.Conditions• SMDR will record the call information using the Control Box clock so that the recording time will beoverlapped at the end of summer time.PC Programming Manual References10.1.1 Control Box Configuration—[2-1-1] System—Date & Time—Date & Time Setting10.1.2 Control Box Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving—Automatic TimeAdjustment—Automatic Time Correction on Stand-alone mode10.1.2.1 Control Box Configuration—[2-1-2] System—Date & Time—SNTP / Daylight Saving—DaylightSavingFeature Manual References2.6.1.1 Station Message Detail Recording (SMDR)4.4.4 Dynamic Host Configuration Protocol (DHCP) ServerDescriptionThe Control Box has a built-in DHCP server. When the DHCP server is enabled, the Control Box willautomatically assign IP addresses to other devices on the network, such as extension telephones.4.4.3 Automatic Time Adjustment40 Feature Manual