3.1 System Programming Using My Portal3.1.1 User ProgrammingYou can edit your personal information as well as limited extension and mailbox settings using My Portal.(You can view menus and setting items, but you can edit only a limited number of items.)– Accessing My Portal for the First Time– Logging in to My Portal– My Portal Screen– Editing Settings in My Portal– Logout• The contents and design of the software are subject to change without notice.Accessing My Portal for the First TimeThis step is required only when accessing My Portal for the first time.• For the IP address of the Control Box, login name, and password, ask your SystemAdministrator.• If the configuration of the Web browser or PC changes, the certificate may need to beinstalled again. Once a certificate has been installed, My Portal will be displayed afterstep 2.1. Launch your Web browser and input the IP address of the Control Box followed by "/WebMC/users_portal/login" into the address bar, and then press Enter.2. If you connect to My Portal using TLS, a security alert window is displayed. Follow the prompts to installa security certificate. The procedure may vary according to your browser.Logging in to My PortalAfter establishing a connection to My Portal, the login window is displayed, and a login name and passwordmust be entered.3.1 System Programming Using My Portal40 Operating Manual