Panasonic VL-V900 Installation Manual

Also see for VL-MV26: Manual Operating instructions Installation guide

Panasonic VL-V900 Installation Manual Manual pdf 70 page image

5-5. Control Box – General settings14Setup Tool5Parameter Description DefaultMonitor Time Out Determines the amount of time that passes when watchingcamera images before the standby screen is displayed.[0]: 180 SEC, [1]:90 SEC, [2]:60 SEC, [3] :30 SEC0(180 SEC)Talk Time Out Determines the amount of time that passes when talking beforethe standby screen is displayed.[0]:90 SEC, [1]:60 SEC, [2]:30 SEC, [3]:180 SEC, [4]:300 SEC0(90 SEC)Camera Signal Tells the system what signal format is used by the externalcamera. [0]:PAL, [1]:NTSC0(PAL)Lift Signal Mode Determines the signalling method used by the lift controller tocommunicate with the lift. Select the signal type according to thespecifications of the lift. [0]:Relay, [1]:binary0(RELAY)Lift Signal Time After a visitor is admitted, this setting determines the amount oftime that the visitor can use the lift to visit the correspondingfloor.If the lift has a similar setting, set this parameter to any valueother than "0"; the lift setting will take priority.(1–900 s, or 0 to disable)300(300 SEC)Visitor Call Mode Determines if visitors can call rooms directly (room mode), or iftheir calls are directed to a reception terminal (reception mode).[0]:ROOM MODE, [1]:RECEPTION MODE0(ROOM MODE)Terminal 1–4 ExtensionNumberTells the system the extension number for terminal 1– 4.(24 digits max.) -Terminal 1–4 NameCodeDetermines the name for terminal 1–4.[1]:TERMINAL #, [2]:RECEPTION, [3]:GATE, [4]:CONTROL ROOM,[5]:RESTAURANT, [6]:HALL, [7]:POOL, [8]:SECURITY OFFICE,[9]:ENTRANCE, [10]:GYM, [11]:GUEST ROOM, [12]:KID’S ROOM,[13]:PARKING, [14]:TERRACE, [15]:LIFT LOBBY1(TERMINAL #1)Terminal 1–4 ReceptionModeDetermines whether terminal 1–4 is a reception terminal or anormal terminal (i.e., cannot be used as a reception terminal).[0]:NORMAL TERMINAL, [1]:RECEPTION TERMINAL0(NOMALTERMINAL)Emergency TerminalExtension NumberTells the system the extension number for the emergencyterminal. (24 digits max.) -Emergency TerminalEmergency ModeDetermines whether the emergency terminal can talkto residents during an emergency call (emergency talkmode) or if the emergency terminal receives anannouncement only (emergency notice mode).[0]:EMERGENCY TALK, [1] EMERGENCY NOTICE:0(EMERGENCYTALK)66