Panasonic VL-SWD272 Operating Instructions Manual

Also see for VL-MWD272: Important information and quick guide

Contents

Panasonic VL-SWD272 Operating Instructions Manual Manual pdf 14 page image

3.6 Setting the language, date andtimeWhen you use the main monitor for the first time, you willbe prompted to set the display language, date, and timesettings.R The play lamp lights if these settings are notconfigured.1 Press the M N button to turn on the display.2 Press the soft keys under the andsoft key icons to select the desired language.3 Press .4 Press again.5 Set the date and time.R Press to select an item (i.e., year, month,day, etc.).R Press or to change the setting.6 When finished, press .R A beep sounds and the display turns off.Changing the language, date and timeYou change the language, date, and time settings laterif desired. Press the M N button, use the ,, and soft keys to navigate to “Initialsettings”.Note:R The date and time settings may be deleted whenthere is a power outage. In this case, reconfigure thesettings.R The time may become out of sync over time (about60 seconds per month).3.7 Wide/zoom settings and zoomposition settingsThese functions are not available for the supplieddoorphone (VL-V522L). You can use these functionswith optional doorphones (page 4).You can configure how doorphone images are initiallydisplayed on the main monitor. Images can be displayedin wide mode or in zoom mode. You can choose differentsettings for when visitors call you, and for when you aremonitoring.Wide mode(default setting) Zoom modeWide mode(default setting) Zoom modeImages are not zoomed.The full camera image isdisplayed.Images are zoomed.Images are displayed 2times larger than widedisplay.Note:R The zoom feature uses a digital zoom. As a result,the image quality of zoomed images is lower thanwide display images.R You can switch between wide and zoom modes andadjust the zoom position while monitoring or on a call.See page 21.Selecting wide or zoom1. Press M N ® select “Initial settings” ®.2. Select “Wide/Zoom settings” ® .R If there are multiple doorphones, select thedoorphone to be configured ® .3. Select the desired setting ® .– “When visitors come”: Your settings will beused when you answer calls from visitors.– “When monitoring”: Your settings will be usedwhen you are monitoring.4. Select the desired display mode ® .R A beep sounds and the settings are changed.5. When finished, press M N.Note:R If you select “Zoom”, adjust the zoom position so thatpeople or objects that you want to view are displayedcentrally in the screen.R When images are recorded in zoom mode, only thezoomed area is recorded.Selecting the zoom position (pan/tilt position)You can select which area of the image is displayedwhen displaying zoomed images.1. Press M N ® select “Initial settings” ®.2. Select “Zoom position settings” ® .R If there are multiple doorphones, select thedoorphone to be configured ® .R A zoomed image from the doorphone isdisplayed.3. Select the desired zoom position ® .R A beep sounds, the settings are changed, and thedisplay turns off.4. When finished, press M N.Note:R If you do not perform any operations for 90 secondswhile changing this setting, the setting is cancelledand the screen turns off.143. Preparation