3.2 Using the display3.2.1 Main monitor - display informationImage viewing screen11 PPABStatus icons (page 12)Soft key icons (page 11)Status icons (main monitor)1Indicates which doorphone is calling,monitoring, or on a call.("1" indicates the device number.)Indicates there is a call from the doorphonewhen monitoring or on a call with anotherdevice (page 20).Indicates that the main monitor is on a call.Indicates that a doorphone and a PBXextension are talking.Indicates that the main monitor ismonitoring.Indicates that images are being recorded(page 17).Indicates that the doorphone's LED lightsare on (page 21).Indicates that "Press-to-talk" mode is on(page 15).Information screenThe information screen can be displayed by pressingM N when the main monitor is idle. The informationscreen is used to display information such as the currentstatus of the main monitor.3.2.2 Sub monitor - monitor displayInformation screenAStatus icons (page 12)The information screen is displayed when the submonitor is taken off the charger, or M N, M N, , orM N are pressed when the screen is off.Image viewing screenࠉࠉࠉە5(&ە5(& AStatus icons (page 12)Status icons (sub monitor)Battery level (page 13).Range status: The more bars displayed,the stronger the signal between submonitor and main monitor.Out of range.Indicates the number of the sub monitorbeing used.Indicates that the doorphone's ringtonevolume is muted.Indicates which doorphone is calling,monitoring, or on a call.("1" indicates the device number.)Indicates there is a call from thedoorphone when monitoring or on a callwith another device (page 20).Indicates that images are being recorded(page 17).123. Preparation