Panasonic VL-SV74 Installation Manual

Also see for VL-MV74: Operating instructions Operating instructions Important information and quick guide

Contents

Panasonic VL-SV74 Installation Manual Manual pdf 4 page image

4Precautions for installationTo avoid malfunction or communication disturbances, do not install the doorphone or the main monitor/extension monitor in the following locations:– Places where vibration or any other kind of impact occurs.– Places where echoing is frequent.– Places near a high concentration of dust, hydrogen sulphide, ammonia, sulphur, or noxious fumes.For the doorphoneR If a strong light is shining on the doorphone, the visitor’s face may not be distinguishable. Do not placethe doorphone in the following locations:– Where most of the background is the sky.– Where the background is a white wall, and direct sunlight will reflect off it.– Where direct sunlight will shine on the doorphone.R Do not place the doorphone in locations where echoing occurs, as this will cause the doorphone tobeep frequently.R Dust protection/water protection is IP44.Only when installation work specified in this guide is properly performed and appropriate waterprotection treatment is performed.R Make sure the rear of the doorphone is not subject to water.R Depending on the installation location, condensation may form on the doorphone’s lens cover. Thismay cause images to become obscured. Condensation will dissipate as the temperature rises.For the main monitor/extension monitorR Leave at least 20 cm of space above, below, and to the left and right sides of the main monitor/extension monitor. Do not install on a wall that is deeply recessed.R Do not install the main monitor/extension monitor inside a wall.R Be sure to install the main monitor/extension monitor more than 5 m away from the doorphone.R In areas surrounded by a high electrical field, disturbances may occur in the main monitor’s/extensionmonitor’s image or sound.Important:R Do not use any cleaning products that contain alcohol, polish powder, powder soap, benzine, thinner,wax, petroleum, or boiling water. Also do not spray the product with insecticide, glass cleaner, hairspray or wall paint. This may cause a change in colour or quality of the product.