Panasonic VL-SDM100BX Operating Instructions Manual

Panasonic VL-SDM100BX Operating Instructions Manual Manual pdf 20 page image

Error messagesMessage Cause & Solution PageCANNOT CONNECT TOCAMERAThe following may be causing the problem.R The Wireless Camera is turned off.– Turn the Wireless Camera on. 9R The batteries of the Wireless Camera have run out ofpower.– Replace the batteries.16R The Wireless Camera is turned on, but the WirelessCamera is out of range from the Monitor.– Move the Monitor to a location closer or withoutobstructions. (When the Wireless Camera is in range ofthe Monitor it can connect to the Monitor.)– Then, turn the power for the Wireless Camera off thenon. (When the Wireless Camera is in range of theMonitor it can connect to the Monitor.)– When using a replacement Wireless Camera (while youroriginal Wireless Camera is being serviced), thereplacement Wireless Camera must be paired to theMonitor. Refer to the instructions below for pairing theWireless Camera.79n How to pair Wireless CamerasPerform the following operations on the Monitor, then,perform the operations on the Wireless Camera within 2minutes.Monitor operations:A Press MMENUN, MDN, and M N (Monitor button) at thesame time. (Enters CAMERA PAIRING MODE.)B Press M N (Monitor button).Wireless Camera operations:C Insert the batteries (page 16).D Turn the power for the Wireless Camera on while pressingthe pair button with a pointed object (keep pressing the pairbutton until the pair indicator starts flashing).R The pair indicator starts flashing quickly.– The pair indicator changes in the following mannerwhen pairing is successfully completed:flash quickly ® light for about 10 seconds ® go out– Pairing must be performed again if the pair indicatorchanges in the following manner:flash quickly ® go out20Help