Panasonic VL-SDM100BX Operating Instructions Manual

Panasonic VL-SDM100BX Operating Instructions Manual Manual pdf 18 page image

TroubleshootingDisplay issuesProblem Cause & Solution PageImages appear slightlydistorted.R This is a characteristic of camera lenses and is not amalfunction. –The image of a person’sface is dark.R When a backlight is present at the Wireless Cameralocation, the person’s face can become dark.– Adjust the brightness of the display while monitoring.13The image is not clear oris blurry.R There is either dirt or water condensation on the lenssurface of the camera.– Clean the dirty surface with a soft dry cloth or allow timefor condensation to evaporate.17The image of the subjectis washed out when it isdark.R Image brightness automatically adjusts to make a person’sface easier to see when it is dark. This is not a malfunction. –The image is white orblack.R The brightness of the display is not properly adjusted.Adjust the brightness while monitoring. 13The image is white, orwhite lines or circles areshown on the display.R Strong light such as sunlight is shining into the lens of theWireless Camera. Though this may cause the displayimage to become difficult to see, this is not a malfunction.– Locate the Wireless Camera away from direct sunlight.–The image is flickering. R The PREVENT MOTTLED COLOR setting does not matchthe power frequency for the region that you are using theunit in.– Matching the power frequency for the region that you areusing the unit in can improve the quality of the colorsdisplayed. When using the unit in a different region (aftermoving, etc.), match the settings to that region.15R AC (alternating current) lights such as fluorescent lightsmay cause flickering. This is not a malfunction. –The image displayed onthe Monitor distorts or isdisplayed slowly. (It takesabout 5 seconds or moreto be displayed.)R There is either a wall or obstruction, or a large distancepresent between the Monitor and Wireless Camera.– Move the Monitor to a location that is either closer orwithout obstructions.7MonitorProblem Cause & Solution PageThe Monitor is warm. R This is normal.– If it feels very hot, unplug the AC adaptor from the poweroutlet, then contact an authorized service center.–18Help