Panasonic VIERA TH-P42X14A Operating Instructions Manual

Panasonic VIERA TH-P42X14A Operating Instructions Manual Manual pdf 34 page image

34Menu Item AdjustmentsSetupDVI PositionSettingsH-posAdjusts horizontal positionV-posAdjusts vertical positionResetDVI PositionSettingsPress the OK button to reset to the default Setup settings(∗1): The HDMI logo is displayed on HDMI-compliant equipment.(∗2): Enquire at your local digital equipment retailer shop.HDMI FunctionsHDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV and the equipment.HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box, a DVDplayer or a game equipment, can be connected to the HDMI terminal using an HDMI compliant (fullywired) cable.About connections, see “External Equipment” (p. 44).NoteHDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.Audio settings can be made on the “HDMI1 Input” menu screen. (p. 25)Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHzHDMI2 terminal is for digital audio signal only.Use with a PC is not guaranteed. Only HDMI video formats in the HDMI table (p. 48) are applicable.If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.These HDMI connectors are “type A”.These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyrightprotection.An equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”,“S-VIDEO”, or “VIDEO” to receive analogue signals.The HDMI input terminal can be used only with the following image signals:480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.For details of the applicable HDMI signals, see p. 48.●●●●●●●●●●●DVI connectionIf the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adaptercable (∗2).When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: useAV2 IN AUDIO terminals).●●DVI Position SettingsIf the picture position is not fit to the screen during the DVI connection, adjust the position on “DVI PositionSettings” in Setup Menu. The settings are memorized for each HDMI terminals and input signals.To make settings “How to Use Menu Functions” to (p. 22)●