Panasonic UB-T780BP Operating Instructions Manual

Also see for ELITE PANABOARD UB-T780BP: Specifications

Panasonic UB-T780BP Operating Instructions Manual Manual pdf 47 page image

Confirming the elite Panaboard OperationAfter assembling the elite Panaboard, confirm that it operates properly by following the procedure below.ActionCheckpointsOperation Measure1 Connect to a computerusing a USB cable.Green LED lights. (Normal operation)Green LED does not light, orred LED is blinking.Check the USB cable.• Check if the USB cable is connectedproperly.• Disconnect the USB cable from thecomputer, and then connect it again.Confirming the Interactive Features1. Following the procedure in "Installing the elite Panaboard software" (page 17), install the softwareand, and connect the included USB cable.2. Confirm that the interactive features are operating correctly.• If a projector is not available, confirm operation using only the elite Panaboard and computer.• When the elite Panaboard software starts, the calibration screen is displayed on the computer screen.• Perform tentative calibration by pressing the 5 points on the elite Panaboard with the electronic pen,as shown in the illustration below.For precise adjustment, it is necessary to use a projector.Approx.100 mm (3 7 /8 in.)Approx. 100 mm (3 7 /8 in.)13452• With the elite Panaboard software running, enter White Background mode and select the marker tool.Confirm operation by writing on the screen board with the electronic pen and checking that the writingis displayed on the computer's screen. (Your writing with the electronic pen will not appear on thescreen board itself.)Operating Instructions (For Basic Operations) 471Installation Manual