Panasonic UB-T780BP Operating Instructions Manual

Also see for ELITE PANABOARD UB-T780BP: Specifications

Panasonic UB-T780BP Operating Instructions Manual Manual pdf 20 page image

Starting the elitePanaboard software andPerforming Calibration1. Connect the elite Panaboard to your computerwith the USB cable.• The elite Panaboard software startsautomatically.• When you start the elite Panaboard software forthe first time, the calibration screen is displayed.• Restart your computer if you are prompted to doso. After the computer has restarted, connectthe elite Panaboard to your computer with theUSB cable.2. Perform calibration.3. Press the electronic pen at a right angle againstthe board at the intersecting points of eachcircle until it disappears (about 2 seconds).Repeat in the order shown in the illustrationbelow.A BCD E• Hold and press the electronic pen at a rightangle to the screen board.• When you push down on the penpoint, theelectronic pen makes a buzzing sound.• When the position of the indicated point hasbeen determined correctly, calibrationautomatically moves to the next point.• When calibration has finished normally, acompletion dialog box is displayed.4. Click [OK].• If the elite Panaboard and projector are fixed sothat they will not move (Wall mounted case),select the [Always use this calibrationinformation.] check box, and click [OK] to skipcalibration from the next time you start the elitePanaboard software.20 Operating Instructions (For Basic Operations)Usage