Panasonic UB-5325 Installation Manual

Also see for UB-5325: Operating instructions

Contents

Panasonic UB-5325 Installation Manual Manual pdf 20 page image

Optional Wall-mounting Kit (KX-B063)20■ Wall-mounting procedure1 Confirm that the wall is strong enough to support the weight of the electronic board.The wall must be capable of supporting at least1,765N [180 kgf (397 lbs.)] for UB-53251,912N [195 kgf (430 lbs.)] for UB-5825.2 Tape the Wall-mounting template on the wall.• Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included withthe electronic board (UB-5325 / UB-5825).• When taping the template on the wall, make sure it is level.3 1) Drill holes in the wall for the wall-mounting fixtures (8 holes total).• Holes on the wall-mounting fixture are 7 mm ( 1 /4") in diameter.2) After removing the wall-mounting template, attach the wall-mounting fixtureswith the appropriate wall-mounting hardware (two screws in each fixture).* This hardware must be locally procured, it is not included in the kit.• Refer to the section “Attaching the wall-mounting fixtures” on page 21 for drilling in the wall and attachingthe mounting fixtures.4 Assemble and install the electronic board.Refer to page 4.CautionWall-mountingfixture LWall-mounting template(provided with UB-5325 / UB-5825)Wall-mountinghardware*Wall-mountinghardware*Wall-mountingfixture R812.8 m m (2' 8")4 80 mm ( 1 ' 6 29/32")50 mm(1 31/ 32")70 mm(2 3 /4 ")21Wall-mountingfixture L1406.4 mm(16")Center of theelectronic board(See page 3.)

/ 22

Related manuals for Panasonic UB-5325