Panasonic TY-TP65P10S Operating Instructions Manual

Also see for TY-TP65P10S: Operating instructions Operating instructions Service manual

Panasonic TY-TP65P10S Operating Instructions Manual Manual pdf 4 page image

4Precautions with regard to setting upWARNINGDo not allow the equipment to get wet.• If liquid splashes onto the equipment, wipe off with a dry cloth. In the unlikely event that liquid gets inside theproduct, unplug the USB cable and contact your dealer. Using the product with liquid still inside may cause a fireor electric shock.Do not disassemble or modify the equipment.• Doing so may cause a fire or electric shock.Do not touch the edge of the infrared transmissive part on the touch panel.• The edge of the infrared transmissive part is sharp; you may be injured if you touch it.Stop using the equipment if anything abnormal occurs.• In the unlikely event that something abnormal occurs (like the equipment emitting smoke or an odor), unplugthe USB cable and contact your dealer. Using the product in this condition may cause a fire, electric shock ormalfunction.Installation work should only be carried out by a qualified technician.• If the bracket is installed incorrectly, the display may fall down and personal injury may result.CAUTIONWhen unplugging the USB cable, be sure to grip the connector.• Unplugging by pulling on the cord may cause cord damage, a fire or electric shock.Do not place the equipment in a location subject to high humidity or excessive dust.• Doing so may cause a fire, electric shock or malfunction.Do not place the equipment in a location where it may be exposed to smoke or steam, or near a stove,kitchen sink or humidifier.Do not place the equipment in a location where it may be exposed to direct sunlight.• Internal temperature may rise and cause a fire.• This equipment has an optic touch panel that uses infrared rays. Direct sunlight contains infrared rays, and thismay interfere with touch panel operation.Before moving the equipment, unplug the USB cable.• Failure to do so may damage the cord, and cause a fire or electric shock. Failure to do so also may result in fallof the equipment and cause injury.If the equipment will not be used for a long time, unplug the USB cable.• To ensure safety, be sure to unplug the USB cable from the socket.Do not place the equipment on an unstable surface, or in a location subject to heavy vibration.• If the equipment tips over or falls, it may cause injury or malfunction. In the unlikely event that the equipment isdamaged, unplug the USB cable and contact your dealer. Using the equipment in this condition may cause afire, electric shock or malfunction.Do not lie the touch panel unit face down or place a plasma display on top of it.• The weight of the plasma display will be applied to the touch panel unit and may cause malfunction.Do not move the equipment after attaching the touch panel unit to the plasma display.• The weight of the plasma display will be applied to the touch panel unit and may cause malfunction.Do not place the equipment in a hot or cold location.• Using the equipment in an extremely hot or cold location may cause malfunction.Do not use fluids like benzene, thinner or alcohol to clean the equipment.• Doing so may cause deformation or ruin the finish by discoloration.To prevent incorrect operation, do not use other equipment utilizing infrared rays near this equipment.Ensure that all the screws are securely tightened when assembling the touch panel.• If the screws are not securely fastened, the touch panel may fall off and be damaged, which may cause injury.Two people are required to install and remove the display.• If two people are not present, the display may be dropped, and personal injury may result.Do not use any displays other than those given in the catalogue.• Otherwise the unit may be dropped and become damaged, and personal injury may result.