- 36 -Watching external inputConnect the external equipment (VCR, DVD, etc.) and you can watch throughthe input.1. Display the input selection menu with AV.2. Select the input mode connected to the equipment with / and pressOK to watch. (The selected mode is displayed on the top left of thescreen.)● TV receives input signals automatically connecting with SCART whenplayback starts.– Input signals are automatically identified by the SCART (pin 8) terminal.– This function is also available for HDMI connections.– When input mode is not switched automatically, perform as above orcheck the setup of the equipment.● You can also select the input pressing AV. Press repeatedly until thedesired input is selected.● To switch between COMPONENT and VIDEO in AV2, select with / .● You can label or skip each input mode. Skipped inputs will not bedisplayed when AV is pressed. (Input Labels)● The remote control is capable of operating the contents or externalequipment.Watching > External equipment > Operating with TV’s remote control● To return to TV modeTV= Note =● If the external equipment has an aspect adjustment function, set it to 16:9.● For details, read the manual of the equipment or ask your local dealer.
