- 140 -Custom - WirelessEnsure the connections are completed before starting network setup.Network > Network connections1. Display the menu with MENU.2. Select Network > Network Connection > Custom > Wireless with / // and press OK to access.● Confirm the encryption key, settings and position of your access pointbefore starting setup. For details, read the manual of the access point.3. Select your desired access point with / and press OK to access.● Available Wireless Networks are displayed automatically.: Encrypted access point● For WPS(Push button)1) Press (red).2) Press the WPS button on the access point until the light flashes.3) Connect the TV with the access point with OK.– WPS: Wi-Fi Protected Setup™– If the connection has failed, check the settings and positions of youraccess point. And then, follow the on-screen instructions.● For WPS(PIN)1) Press (green).2) Enter the PIN code to the access point.3) Connect the TV with the access point with OK.● For Manual1) Press (yellow).2) You can set up SSID, security type, encryption type, and encryptionkey manually.3) Follow the on-screen instructions and set manually.– When you use 11n (5 GHz) for the wireless system between thebuilt-in wireless LAN and access point, select AES for the encryptiontype.● To search access points again(blue)● To display / hide information of the highlighted access point● It is recommended to select the encrypted access point.
