19Press the CH SEARCH button to showfreeze---frames of the programmes beingbroadcast on all of the stored channels. Theseimages are displayed in series clockwise aroundthe edge of the screen, starting from the top left.The current programme is displayed in the centreof the screen, still playing.The feature cycles through the stored channelsuntil either the STILL key is pressed to pause thesearch or the CH SEARCH button is pressed to exitthe feature.Press the red button to select each channel’sfreeze---frame in turn.Press the green button to watch the selectedchannel, exiting the feature.Press the blue button to watch the currentprogramme (displayed centre screen), exiting thefeature.Press the TELETEXT button to move betweenwatching the current programme, viewing teletextand the picture and text feature. picture and textlets you see the current programme and a page ofteletext side by side.Whilst using this feature, the remote control affectsthe teletext page; if you wish to make changes tothe programme viewed press the TELETEXTbutton to return to watching the programme on itsown then make the desired changes.Press to freeze the picture, press again to returnto watching the current programme.(Access Strobe via the Setup menu, see page 10).Takes a series of freeze---frame images (onesecond delay between each image being taken)from the current programme watched, these aredisplayed in series clockwise around the edge ofthe screen, starting from the top left. The currentprogramme is displayed in the centre of thescreen, still playing.To pause (freeze) Strobe, press the STILL buttonon the remote control, press again to continuetaking the freeze---frames. To exit the Strobefeature and return to watching the currentprogramme, press any button on the remotecontrol other than STILL.INDEXCH SEARCHStrobe modeHOLDSTILLTELETEXT mode Picture and text modeTV/TEXTChannel searchHOLDSTILLINDEXCH SEARCHHOLDSTILLChannel searchINDEXCH SEARCHPicture and textTV/TEXTStillHOLDSTILLStrobe