Panasonic TX-32G302B Operating Instructions Manual

Panasonic TX-32G302B Operating Instructions Manual Manual pdf 20 page image

English - 19 -options. To change the layout highlight TimelineSchedule and press OK.Event OptionsUse the directional buttons to highlight an eventand press OK button to display Options menu. Thefollowing options are available.Select Channel: Using this option, you can switchto the selected channel in order to watch it. Theprogramme guide will be closed.More Info: Display detailed information on the selectedevent. Use up and down directional buttons to scrollthrough the text.Set Timer on Event / Delete Timer on Event: SelectSet Timer on Event option and press OK. You can settimers for future events. To cancel an already set timer,highlight that event and press the OK button. Thenselect Delete Timer on Event option. The timer willbe cancelled.Notes: You cannot switch to any other channel while there isan active timer on the current channel.It is not possible to set timer for two or more individual eventsat the same time interval.Teletext Services (where available)Press the Text button to enter. Press again to activatemix mode, which allows you to see the teletext pageand the TV broadcast at the same time. Press oncemore to exit. If available, sections in the teletext pageswill become colour-coded and can be selected bypressing the coloured buttons. Follow the instructionsdisplayed on the screen.Digital TeletextPress the Text button to view digital teletext information.Operate it with the coloured buttons, cursor buttonsand the OK button. The operation method may differdepending on the contents of the digital teletext. Followthe instructions displayed on the digital teletext screen.When the Text button is pressed again, the TV returnsto television broadcast.MHEG TeletextWith digital terrestrial broadcasting (DVB-T), in additionto pictures and sound, you can also view digital teletext.Digital teletext is sometimes broadcast at the sametime with the normal broadcasting.• Press the Text or Red button• The digital teletext information appears• Operate it with the coloured buttons, directionalbuttons and OK buttonThe operation method may differ depending on thecontents of the digital teletext. Follow the instructionsdisplayed on digital teletext screen. Press the Textbutton to returs to television broadcast.Software UpgradeYour TV is capable of finding and updating the firmwareautomatically via the broadcast signal or via Internet.Software upgrade search via user interfaceOn the main menu select Settings>System and thenMore. Navigate to Software upgrade and press theOK button. Then select Scan for upgrade and pressOK button to check for a new software upgrade.If a new upgrade is found, it starts to download theupgrade. After the download is completed, a warningwill be displayed, press OK button to complete softwareupgrade process and restart TV.3 AM search and upgrade modeYour TV will search for new upgrades at 3:00 o’clockif Automatic scanning option is set to Enabled and ifthe TV is connected to an aerial signal or to Internet. Ifa new software is found and downloaded successfully,it will be installed at the next power on.Note: Do not unplug the power cord while led is blinking duringthe reboot process. If the TV fails to come on after the upgrade,unplug, wait for two minutes then plug it back in.All updates are automatically controlled. If a manual searchis carried out and no software is found then this is the currentversion.Troubleshooting & TipsTV will not turn onMake sure the power cord is plugged in securely to awall outlet. Press the Power button on the TV.Poor picture• Check if you have correctly tuned the TV.• Low signal level can cause picture distortion. Pleasecheck antenna connections.• Check if you have entered the correct channelfrequency if you have performed manual tuning.No picture• TV is not receiving any signal. Make sure the correctsource has been selected.• Is the antenna connected properly?• Is the antenna cable damaged?• Are suitable plugs used to connect the antenna?• If you are in doubt, consult your dealer.No sound• Check if the TV sound is muted. Press the Mutebutton or increase the volume to check.• Sound may be coming from only one speaker. Checkthe balance settings from Sound menu.Remote control - no operation• The batteries may be exhausted. Replace thebatteries.