Panasonic TX-32G302B Operating Instructions Manual

Panasonic TX-32G302B Operating Instructions Manual Manual pdf 15 page image

English - 14 -Settings Menu ContentsPicture Menu ContentsMode You can change the picture mode to suit your preference or requirements. Picture mode canbe set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.Contrast Adjusts the light and dark values on the screen.Brightness Adjusts the brightness values on the screen.Sharpness Sets the sharpness value for the objects displayed on the screen.Colour Sets the colour value, adjusting the colours.Energy SavingFor setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,Screen Off or Off.Note: Available options may differ depending on the selected Mode.Backlight This setting controls the backlight level. The backlight function will be inactive if theEnergy Saving is set to an option other than Custom.Advanced SettingsDynamicContrast You can change the dynamic contrast ratio to desired value.Noise Reduction If the signal is weak and the picture is noisy, use the Noise Reduction setting to reducethe amount of noise.Colour Temp Sets the desired colour temperature value. Cool, Normal, Warm and Custom optionsare available.White Point If the Colour Temp option is set as Custom, this setting will be available. Increase the‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.Picture Zoom Sets the desired image size format.Picture Shift This option may be available depending on the Picture Zoom setting. Highlight andpress OK, then use directional buttons to shift the picture upwards or downwards.Film Mode Films are recorded at a different number of frames per second to normal television programmes.Turn this feature on when you are watching films to see the fast motion scenes clearly.Skin Tone Skin tone can be changed between -5 and 5.Colour Shift Adjust the desired colour tone.HDMI Full Range While watching from a HDMI source, this feature will be visible. You can use this featureto enhance blackness in the picture.PC Position Appears only when the input source is set to VGA/PC.Autoposition If the image is not centered in VGA mode use this option to automatically adjust the positionof the image. Press OK to start the auto adjustment.H Position This item shifts the image horizontally to the right hand side or left hand side of the screen.V Position This item shifts the image vertically towards the top or bottom of the screen.Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dotintensive presentations like spreadsheets or paragraphs or text in smaller fonts.Phase Depending on the input source(computer etc.) you may see a hazy or noisy picture onthe screen. You can use phase to get a clearer picture by trial and error.Reset Resets the picture settings to factory default settings (except Game mode).While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menuwhile in PC mode.