Panasonic TX-28DK1 Operating Instructions Manual

Panasonic TX-28DK1 Operating Instructions Manual Manual pdf 12 page image

12The widescreen TV will allow you to enjoy viewing the picture at its maximum size, includingwidescreen ‘cinema format’ pictures.Note: Just mode is not available when viewing an RGB source.Press the ASPECT button to move through thesix aspect options: Panasonic Auto, 4:3, Zoom,16:9 (Full), 14:9 and JustPanasonic AutoPanasonic Auto determines the best aspect ratio touse to display the picture you are viewing. It does thisusing a four step process to determine if the picturebeing viewed is a widescreen picture.If Panasonic Auto detects a widescreen signal itswitches into the appropriate 16:9 or 14:9 widescreenmode. If Panasonic Auto does not detect awidescreen signal then the picture is displayed in Justor 4:3 mode.The text shown on the screen indicates howPanasonic Auto determined which ratio to use:’WIDE’ appears in the top left of the screen if awidescreeen identification signal (WSS) is found or asignal found through a Scart socket. Panasonic Autoswitches to the appropriate 16:9 or 14:9 widescreenratio’Panasonic Auto’ appears in the top left of the screen ifblack stripes above and below the picture aredetected. Panasonic Auto chooses the best ratio andexpands the picture to fill the screen. This process cantake several minutes, depending how dark the pictureis.’Panasonic Auto’ appears in the top left of the screenand red and green keys at the bottom if no indication ofa widescreen signal is found, the picture is displayedin Just or 4:3 mode. If the picture has a standard 4:3aspect ratio then you may prefer to view it at its originalsize, the red and green keys that appear allow you tochoose between viewing at standard 4:3 size orexpanded in Just mode.Equally, you may prefer to select one of the othermodes available to view the picture.Notes:D If, in Panasonic Auto mode, you experienceproblems with the screen display size whenplaying back widescreen format recordings fromyour VCR then it is possible that the trackingcontrol of your VCR requires adjustment (yourVCR instruction book will contain adjustmentdetails).D The widescreen aspect ratios of different films andprogrammes can vary. If these are wider than astandard 16:9 aspect picture then a black bandmay be visible at the top and bottom of the screen.ASPECT CONTROLSASPECT’Panasonic Auto’ appears in the top left of the screen,The picture is displayed in Just or 4:3 mode,red and green keys appear, allowing switching betweenJust and 4:3 modes.Panasonic Auto4:3 Just’Panasonic Auto’ appears in the top left of the screen,The best ratio is chosen and the picture expanded to fill the screen.’WIDE’ appears in the top left of the screen, Panasonic Autoswitches to the appropriate 16:9 or 14:9 widescreen ratio.WIDEPanasonic Auto