Panasonic TX-26LXD500 Operating Instructions Manual

Also see for TX-26LXD500: Service manual Service manual Service manual

Contents

Panasonic TX-26LXD500 Operating Instructions Manual Manual pdf 22 page image

22Timer Programming menu (DVB mode)For an external recording device to record DVB programmes, the integrated DVB system must be active to provide the signal.The Timer programming menu allows you to choose programmes that you wish to record. At the correct time, the DVB system willswitch on and tune to the correct station (even if the TV is in standby mode). If the recording device is compatible with Q-Link orsimilar technologies (see page 32) and connected to the TV’s AV2 / AV4 terminal, you do not need to programme the device – theDVB system will control the recording process.The device must be connected to the TV’s AV2 / AV4 terminal using a SCART cable to record DVB programmes.Press the MENU button.Move to Setup menu.Access Setup menu.Move to DVB Setup Menu.Access DVB Setup Menu.Move to Timer Programming.Access Timer Programming.Press the OK button to begin programming.Select the Programme position to be recorded.Move to the Date field.Set the Date on which recording is to take place.In DVB mode MENUEXITNotes:Ten seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching anotherDVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.You can continue to watch analogue stations while a timer recording is in progress.If you attempt to switch to another DVB programme position while a timer recording is in progress the message “DVB Tuner Locked”will be displayed. Press the OK button to continue recording, or EXIT to unlock the programme position. Beware that if you press EXIT,timer programming for this DVB position will be immediately deleted.To immediately cancel a recording that is already in progress, press GUIDE then EXIT.You may not be able to cancel recording just before it starts. Use the recording device to cancel it.Notes:• To delete a timer programme,select the recording with the cursorbar and press the Red button.• To edit a previously entered timerprogramme, select it with thecursor bar and press the OKbutton.• Timer programmes can also beentered from the TV Guide. Seepage 30.Two minutes before the recording is due to start, a reminder will appear on screen:Press the OK button to remove the reminder from the screen.If you wish to cancel the recording, press the EXIT button.Note: The above 2 operations will not be necessary if the TV set is in standby mode.OKTimer ProgrammingChild LockDVB Setup menuMulti AudioAccessDVB System SetupengDVB Tuning MenuProfile EditExitReturnSelect timerEdit timerDeleteDVB Timer Programming Thu 05/08/04 18:491340339246185BBC1ITV1BBC News 24BoomerangKerrang!The Community ChannelThe HitsFive6/8 FR7/8 SA8/8 SU9/8 MO10/8 TU11/8 WE12/8 TH13/8 FR18:0021:3015:3023:1020:0019:3016:0019:0020:0022:3016:4524:3022:0021:3018:0020:0012060758012012012060OffOffOffOffOffOffOffOffExtExtExtExtExtExtExtExtPos. Name Date Start End min. Media0 9COK1 2 34 5 67 8 90OKVCR1 2 34 5 67 8 90EXITThe current Date and Time are shown at the top of the menu.See page 23 for further Date options.Move to the Start time field and set the Start time .Move to the End time field and set the End time .The duration of the recording is shown in the min. column.The channel position, start and end times can also be inputusing the numeric buttons on the remote control.Move to the Subtitles field.If you wish to record subtitles (if available) select Auto.Move to the Media field.Select the recording device. SD: SD card Ext: External devicePress the OK button to store.Press the EXIT button to leave the DVB Timer Programming screen.OK