- 72 -Set the equipment to WPS (Push button) mode. For details, read themanual of the equipment.WPS(PIN):Enter the PIN code of the equipment.● If the connection has failed, check the settings and positions of theequipment. And then, follow the on-screen instructions.■ Change settingsYou can set up Network name(SSID), Encryption key, Wireless type andChannel setting method manually.Follow the on-screen instructions and set manually.● Set Reset settings to reset the items of Change settings.= Note =● You cannot connect the internet service while the TV is set to WirelessAccess Point.● You can connect up to 7 devices. But the transfer rate will vary accordingto communication environment or the numbers of connected equipment.● To confirm the current network settingsHome network Network settings Network Status● Ensure the equipment to connect supports WPS for this setup.● WPS: Wi-Fi Protected Setup™Network StatusDisplays and checks the network status (MAC Address, current networksettings, etc.).1. Display the menu with MENU2. Select Network Network Status with / and press OK to access3. Automatically testing is done and the Network Status screen is displayedTry Again:Performs automatic testing of the network connection for the TV anddisplays the current status again.Status Details:Displays the detailed network status (SSID, security type, encryptiontype, etc.).● For more information of the network connection, select Help.
