- 39 -Set to On to enable Effect setting.● When setting to On, a safety precaution message will appear. Read itcarefully and press RETURN to go to Effect setting.● When adjusting, take into account that the vision of 3D images variesamong different individuals.Effect:Adjusts the 3D depth according to the contents or to your preference.(This setting will not be memorised when changing the input mode orchannel.)L/R Picture Swap(L/R (Normal) / R/L (Reversed))Swaps pictures for left eye and right eye (except in 2D 3D mode).Select R/L (Reversed) if you feel that the sense of depth is unusual.● This setting will not be memorised when changing the input mode orchannel.Edge Smoother(On / Off)Set to On if you feel the contoured parts of an image are not smooth enough(except in 2D 3D mode).Safety PrecautionsDisplays the precautions for viewing 3D images.= Note =● Display the image (TV, external input, etc.) full-screen to use this functioncompletely.Source image formatIf the picture appears to be abnormal, refer to the table of images that can beseen for each 3D Mode Selection (Manual) and the source image format, andselect the correct 3D mode.● 3D images are displayed correctly with appropriate 3D format as followingyellow boxes.
