- 68 -3. Select Quick setup with / and press OK to access4. Automatically setup is done and the Network Status screen is displayedHome network Network settings Network Status5. Select Exit with / and press OK to set● To set manuallyHome network Network settings Custom - WiredCustom - WirelessEnsure the connections are completed before starting network setup.Home network Network connections1. Display the menu with MENU2. Select Network Network Connection Custom Wireless with / // and press OK to access● Confirm the encryption key, settings and position of your access pointbefore starting setup. For details, read the manual of the access point.3. Select your desired access point with / and press OK to access● Available Wireless Networks are displayed automatically.: Encrypted access point● For WPS(Push button)1) Press (red)2) Press the WPS button on the access point until the light flashes3) Connect the TV with the access point with OK– WPS: Wi-Fi Protected Setup™– If the connection has failed, check the settings and positions of youraccess point. And then, follow the on-screen instructions.● For WPS(PIN)1) Press (green)2) Enter the PIN code to the access point3) Connect the TV with the access point with OK● For Manual1) Press (yellow)2) You can set up SSID, security type, encryption type, and encryptionkey manually3) Follow the on-screen instructions and set manually– When you use 11n (5 GHz) for the wireless system between thebuilt-in wireless LAN and access point, select AES for the encryption
