Panasonic TH-85PB1E Operating Instructions Manual

Also see for TH-103PB1E: Operating instructions Service manual

Contents

Panasonic TH-85PB1E Operating Instructions Manual Manual pdf 18 page image

18Connecting with Wired LANYou can configure settings when the wireless module (ET-WM200E) is mounted.To use the network function, make the necessary settings in [Network Setup] and be sure to set [Control I/F Select]to [LAN]. (See page 9)When [LAN] is set, the slot power is turned on, and power indicator is lit orange under the condition of power offwith remote control (stand-by state), regardless of the [Slot power] setting.Computer operationConnection can be made with wired LAN. However, confirm to your system administrator on network settingsbefore changing any settings.Turn on the computer.1Make the network setting according to your system administrator.2 If the Display settings are the default settings (See page 10), the computer can be used with the followingnetwork settings.IP address 192.168.10.101Subnet mask 255.255.255.0Gateway 192.168.10.1Computer operationMake the network setting according to your system administrator.1 If you select [M-DIRECT] for [Wireless LAN] in the [Network Setup] menu, the IP address will• automatically be acquired.If you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Setup] menu (see• page 14), then the computer can be used with the following network settings.IP address 192.168.11.101Subnet mask 255.255.255.0Gateway 192.168.11.1Click [Start]→[Connect To2 ¼]→[Wireless Network Connection¼], select the wirelessnetwork of [SSID] set with the Display, and then click [Connect¼].When you select default settings of [M-DIRECT] for [Wireless LAN] in the [Network Setup] menu, the SSIDis [M-DIRECT + The last 4 digits of the Display ID].When you select default settings of [USER1] - [USER3] for [Wireless LAN] in the [Network Setup] menu, theSSID is [Panasonic Display].The names are for Windows XP. In Windows Vista/Windows 7, the procedure will be [Start]→[Connect To]. The¼names may differ depending on the Operation System. Please connect the network according to the displayednames on your computer.If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation• procedure for connection.If you use the access point, configure the Display and each network setting of the computer following the• instruction of the network administrator.Connecting with Wireless LAN