Panasonic TH-85PB1E Operating Instructions Manual

Also see for TH-103PB1E: Operating instructions Service manual

Contents

Panasonic TH-85PB1E Operating Instructions Manual Manual pdf 8 page image

8ConnectionExample of Network Connection (Wired LAN)Connecting Wireless Module (Wireless LAN)To use the wireless function, the wireless module (ET-WM200E) (sold separately) is necessary.When connecting the wireless module to thedisplay, remove the protective film and cap.Connecting procedureHold the wireless module with its LED on the nearside and connect it to the wireless module connectionterminal.Do not connect any other device than the wireless module(ET-WM200E).Securing the LAN cable (TH-85PB1E)ClamperIn accordance with the Installation Instructions, secure the LAN cable so that it will not become nearthe display unit.When using a pedestal (TY-ST85P12) for the installation of the display, use a clamper suppliedwith the display to secure the LAN cable. For use with another method of installation, refer tothe corresponding Installation Instructions.ET-WM200LEDDisplay (main unit, rear)Hub or broadband routerLAN cable(not supplied)COMPUTERLessthan10 cmLessthan10 cmFerrite core(supplied)Ferrite core(supplied)Installing the Ferrite corePull back the tabs(in two places)Wind the cabletwiceOpenPress the cablethrough and close• Lay the LAN cable away from other connection cables (excluding the power cord).• Make sure the broadband router or hub supports 10BASE-T/100BASE-TX.• To connect a device using 100BASE-TX, use “category 5” LAN cable.• Touching the LAN terminal with a statically charged hand (body) may cause damage due to its discharge.Do not touch the LAN terminal or a metal part of the LAN cable.• For instructions on how to connect, consult your network administrator.