Panasonic TH-85PB1E Operating Instructions Manual

Also see for TH-103PB1E: Operating instructions Service manual

Contents

Panasonic TH-85PB1E Operating Instructions Manual Manual pdf 17 page image

17Network SetupControl I/F SelectSet whether to control with RS-232C (serial) or LAN. When [LAN] is set, the slot power is turned on, and powerindicator is lit orange under the condition of power off with remote control (stand-by state), regardless of the [Slotpower] setting.Select [Control I/F Select] in [Network Setup] menu and press1 button.Select [RS-232C] or [LAN].2ResetYou can reset the network setting to the factory default of the Display.Select [Reset] in [Network Setup] menu and press1 button.Network SetupOk CancelResetSelect [Ok] and press2 .It takes some time to restart network while the network settings are initialized.During that time, “Network Setup” in the “Setup” menu is grayed out and cannot be set.StatusDisplays the current network status.Select [Status] in [Network Setup] menu and press button.The Display information, settings of wired LAN and wireless LAN are displayed.WEB ControlSelect [On] to control the display from the web browser. When [On] is set, the slot power is turned on, and powerindicator is lit orange under the condition of power off with remote control (stand-by state), regardless of the [Slotpower] setting.Select [WEB Control] in [Network Setup] menu and press1 button.Select [On] or [Off].2Live mode Cut InSet this [ON] to allow interrupt of the Live mode by other users while the Live mode is active (sending image) by the“Wireless Manager”. For details, refer to “Wireless Manager” operating manual.Select [Live mode Cut In] in [Network Setup] menu and press1 button.Select [On] or [Off].2