Panasonic TH-80SF2HU Operating Instructions Manual

Also see for TH-70SF2HU: Operating instructions Operating instructions Operating instructions (functional manual)

Contents

Panasonic TH-80SF2HU Operating Instructions Manual Manual pdf 17 page image

17EnglishIdentifying ControlsDisplay1● Slide the lever on the rear panel to eject the powerindicator and remote control sensor.To store them, slide the same lever, or directly push inthe bottom surface of the remote control sensor.Note● For normal use, pull out the power indicator andremote control sensor from the edge side of themain unit by operating the lever on the rear panel.Depending on the setup condition such as whenusing the multi display, store them in the main unit.1 Power Indicator / Remote control sensorThe Power Indicator will light.When the power of the unit is ON (Main Power On/ Off button: ON)● Picture is displayed: Green● Power OFF (standby) with remote control:• When [Network control] is set to [Off]: Red• When [Network control] is set to [On]: Orange(Red/Green)● Power OFF with “Power management” function:Orange (Red/Green)When the power of the unit is OFF (Main PowerOn / Off button: OFF): No lightNote● Even if the unit is turned off with the powerindicator off, some of the circuits are in power-onstatus.● When the power indicator is orange, powerconsumption during standby is generally largerthan that of when the power indicator is red.MENU ENTERINPUT + -8870-inch model80-inch model1 External input / output terminalConnects to video equipment, PC, etc. (see page 15)2

( )Turns the power On / Off.3 Selects the connected device.4 Displays the menu screen.5 <+ (Unit)> / <- (Unit)>Adjusts the volume.On the main screen, switches settings or adjustssettings level.6 < (Unit)> / < (Unit)>Selects the setting item on menu screen.7 Configures the item on menu screen.Switches aspect mode.8 Built-in speakers80-inch modelSound is output backward.70-inch modelSound is output downward.Note● To output sound from the built-in speakers of theunit, be sure to set [Output select] in the [Sound]menu to [SPEAKERS].