Panasonic TH-80SF2HU Operating Instructions Manual

Also see for TH-70SF2HU: Operating instructions Operating instructions Operating instructions (functional manual)

Contents

Panasonic TH-80SF2HU Operating Instructions Manual Manual pdf 6 page image

English6Safety PrecautionsWARNING■ SetupThis LCD Display is for use only with the followingoptional accessories.Use with any other type of optional accessories maycause instability which could result in the possibilityof injury.Securely install the pedestal, an optional accessory.Ask an authorized dealer for installation.The following number of people are required forinstallation.80-inch model : 470-inch model : 2• PedestalTY-ST75PE9• Digital Interface BoxET-YFB100G• DIGITAL LINK SwitcherET-YFB200G• Early Warning Software(Basic license/3-year license):ET-SWA100 series*1• Video Wall ManagerTY-VUK10*2*1: Suffix of the part number may differ depending onthe license type.*2: Supports Ver1.8 or later.Note● The part number of the optional accessories aresubject to change without notice.When installing the pedestal, read the operatinginstructions supplied with it carefully and install properly.Also, always use the overturn prevention accessories.We are not responsible for any product damage, etc.caused by failures in the installation environment forthe pedestal or wall-hanging bracket even during thewarranty period.Small parts can present choking hazard if accidentallyswallowed. Keep small parts away from young children.Discard unneeded small parts and other objects,including packaging materials and plastic bags/sheets toprevent them from being played with by young children,creating the potential risk of suffocation.Do not place the Display on sloped or unstablesurfaces, and ensure that the Display does not hangover the edge of the base.• The Display may fall off or tip over.Install this unit at a location with minimal vibrationand which can support the weight of the unit.• Dropping or falling of the unit may cause injury ormalfunction.Caution - For use only with UL Listed Wall MountBracket with minimum weight/load 62.0 (135 lbs).When installing the display vertically, be sure thatthe power indicator comes to the downside.Power indicator• If installed in different directions, heat is generatedand it may cause fire or damage to the Display.Cautions for Wall or Pedestal Installation• The installation should be performed by an installationprofessional. Installing the Display incorrectly maylead to an accident that results in death or seriousinjury. Use the optional Pedestal. (see page 6)• When installing on a wall, a wall hanging bracket thatconforms to VESA standards must be used.80-inch model : VESA 600 × 40070-inch model : VESA 400 × 400(see page 9)• Before installation, be sure to check if the mountinglocation has enough strength to support the weight ofthe display and the wall hanging bracket for anti drop.• If you terminate the use of the product, ask aprofessional to remove it promptly.• When mounting the Display on the wall, prevent themounting screws and power cable from contactingmetal objects inside the wall. An electric shock mayoccur if they contact metal objects inside the wall.■ When using the LCD DisplayThe Display is designed to operate on 110 ‒ 127 or220 ‒ 240 V AC, 50/60 Hz.If problems or malfunction occur, stop usingimmediately.If problems occur, unplug the power supply plug.• Smoke or an abnormal odour come out from the unit.• No picture appears or no sound is heard,occasionally.• Liquid such as water or foreign objects got inside theunit.• The unit has deformed or broken parts.If you continue to use the unit in this condition, itcould result in fire or electric shock.• Unplug the power supply plug from the wall outlet,and then contact the dealer for repairs.