Panasonic TH-65PF12EK Operating Instructions Manual

Also see for TH-103PF12E: Specifications Service manual Service manual

Contents

Panasonic TH-65PF12EK Operating Instructions Manual Manual pdf 36 page image

36Notes:• This function does not work in the following cases.When “MULTI DISPLAY Setup” is set to “On”When “PORTRAIT Setup” is set to “On”When in digital zoom mode• Some of the screen may appear to be missing depending on the screen setting conditions.Peak limitOn: Suppresses image contrast (peak brightness).Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 59)Reduces screen image retentionExpress settingsSet the “Image Retention Reduction” menu to the recommended settings.All menus will be locked.Picture Mode: NormalContrast: 10Side panel: HighNANODRIFT Saver: High midPeak limit: On1 Select “Express settings”.Express settingsCustom settingsResetExtended life settings 1 select2 access2 Select the input to apply the settings.Apply to current inputApply to all inputsExtended life settings 1 select2 set3 Select “Yes”.Apply to current inputNoYesExtended life settings 1 select2 setNANODRIFT SaverMoves the display position of the screen slightly to reduce image retention on the display panel.Off: If, for example, the side bars are displayed, moves the display position of the screen when the power is turnedon and when the picture is muted (VMT command input).Min–Max: Moves the display position of the screen at set time intervals. You can set the screen movement range.If you change the value, a mask is displayed in the range where the picture is missing as a result of positionmovement.If this is set to other than “Off”, the current setting value isdisplayed below the input display.PCNANODRIFT High mid16:9