Panasonic TH-65PF12EK Operating Instructions Manual

Also see for TH-103PF12E: Specifications Service manual Service manual

Contents

Panasonic TH-65PF12EK Operating Instructions Manual Manual pdf 23 page image

0NormalNormaliseAuto SetupPos. /SizeV-Pos0H-PosV-SizeDot ClockH-SizeClock Phase1:1 Pixel Mode Off0000000NormalNormalisePos. /SizeV-PosH-Pos0V-SizeH-Size1:1 Pixel Mode OffAuto Setup23Adjusting Pos. /Size1 Press to display the Pos. /Size menu.Press to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.32Notes:• Unadjustable items are grayed out.Adjustable items differ depending on the input signal and the display mode.• Adjustment details are memorized separately for different input signal formats (Adjustments for component signals arememorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF,1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This pictureposition movement cannot be controlled by the Picture Pos./Size function.• If adjusting the Picture V-Pos/V-Size in Panasonic Auto with 16:9 mode, the adjustment is not memorized. Whenexiting the mode, the screen will return to a former adjustment.4During “Video (S Video)”, “Digital”,“SDI” and “HDMI” input signal.During “Component”, “RGB” and“PC” input signal.Auto Setup H-Pos/V-Pos, H-Size/V-Size, Dot Clock and Clock Phase are automatically adjusted when the RGB orPC signal is received.This setting is enabled under the following conditions:• This setting only support single screen display. Two screen display or multiple display are notsupported.• When “Component/RGB-in Select” or “YUV/RGB-in select” in the “Setup” menu (see page 46) is set to “RGB”,this setting is enabled.• When the signal is not PC format, this setting is enabled only if “Over scan” (see page 24) is “Off” or“1:1 Pixel Mode” (see page 25) is “On”, and H-Size/V-Size is not automatically adjusted.This setting will be invalid and will not work under the following conditions:• Aspect is set to “Just”• “Display size” in the Options menu (see page 53) is set to “On”Using Remote ControlWhen on the remote control is pressed, “Auto Setup” will be executed.When Auto Setup does not work, “Invalid” is displayed.Auto modeWhen the “Auto Setup“ is set to “Auto” in the Options menu (see page 54), automatic position adjustment starts:• When the display power is turned ON.• When the input signal is switched.