Panasonic TH-60A430H Operating Instructions Manual

Panasonic TH-60A430H Operating Instructions Manual Manual pdf 8 page image

8 English■ Installing / Removing batteriesPull openHookNote the correctpolarity (+ or -)CloseIndicator / Control panel15 7234 6Rear side of the TV1 Input mode selection● Press repeatedly until you reach the desired mode.[Main Menu]● Press and hold for about 3 seconds to display mainmenu.OK (when in the menu system)2 Channel Up / DownCursor Up / Down (when in the menu system)3 Volume Up / DownCursor Left / Right (when in the menu system)4 Mains power On / Off switch● Use to switch the mains power.5 Remote control signal receiver● Do not place any objects between the TV remotecontrol signal receiver and remote control.6 Ambient sensor● Senses brightness to adjust picture quality when[Ambient sensor] in the Picture Menu is set to [On].7 Power LEDRed: StandbyGreen: OnThe LED blinks when the TV receives a command fromthe remote control.First time Auto TuningAutomatically sets up the TV and searches for availableTV channels when the TV is turned on for the first time.● These steps are not necessary if the setup has beencompleted by your local dealer.● Please complete connections (p. 5 - 7) and settings(if necessary) of the connected equipment beforestarting Auto Setup. For details of settings for theconnected equipment, read the manual of theequipment.1 Plug the TV into mains socket andturn power onPOWER● Takes a few seconds to be displayed.2 Select the following itemsSet up each item by following the on-screen instructions.Example:Please select your viewing environment.Home Shop■ How to use remote controlMove the cursorAccess the item / store the settingReturn to the previous itemExit the itemSelect your languageSelect [Home]Select [Home] viewing environment to use in your homeenvironment.● [Shop] is for shop display.● To change viewing environment later on, you willneed to initialise all settings by accessing ShippingCondition.Tick the TV signal mode to tune, and then select[Start Auto Tuning]: tune (search for the available channels): skip tuningAuto Tuning is now complete andyour TV is ready for viewing.If tuning has failed, check the connection of the RFcable, and then follow the on-screen instructions.