Panasonic TH-60A430H Operating Instructions Manual

Panasonic TH-60A430H Operating Instructions Manual Manual pdf 11 page image

11English[Speech]: Improves sound quality for watching news,drama, etc.[User]: Adjusts the sounds manually by using theequaliser to suit your favourite sound quality.● For the User mode, [Equaliser] will be available in theSound Menu instead of [Bass] and [Treble]. Select[Equaliser] and adjust the frequency.BassAdjusts level to enhance or minimise lower, deepersound output.TrebleAdjusts level to enhance or minimise sharper, highersound output.EqualiserAdjusts the frequency level to suit your favourite soundquality.● This function is available when [Mode] is set to [User].● Select the frequency and change the frequency levelby using the cursor button.● To enhance the bass sound, raise the level of thelower frequency. To enhance the treble sound, raisethe level of the higher frequency.● To reset the levels of each frequency to the defaultsettings, select [Reset to Defaults] by using the cursorbutton.BalanceAdjusts volume level of right and left speakers.SurroundProvides a dynamic enhancer of width to simulateimproved spatial effects.Auto Gain ControlAutomatically regulates large sound level differencesbetween channels and inputs.Volume CorrectionAdjusts the volume of each individual channel or input mode.Speaker Distance to WallCompensates for the low frequency sound due to thedistance between the speakers and the wall.● If the back space between the TV and wall is within30 cm, [Up to 30cm] is recommended.● If the back space between the TV and wall is over30 cm, [Over 30cm] is recommended.MPXSelects multiplex sound mode. (if available)[Stereo]: Use this normally.[Mono]: When stereo signal cannot be received.[M1] / [M2]: Available while mono signal is transmitted.Audio PreferenceSelects the initial setting for audio tracks.[Auto]: Automatically selects the audio tracks ifprogramme has more than two tracks. The priority is givenin the following order - HE-AAC, Dolby Digital, MPEG.[MPEG]: The priority is given to MPEG.■ HDMI Content TypeAdjusts the picture settings of each HDMI inputaccording to the selected content type.[Auto]: Automatically adjusts the picture settingsaccording to the received HDMI content if the connectedequipment supports HDMI Content Type.● To set the availability of each content type for [Auto]mode, select [Auto Detail Setting].● For HDMI input.■ HDMI RGB RangeAdjusts the black level of the image for each HDMI input.● When the black level is not suitable, select [Full].● For HDMI input.■ AV Colour SystemSelects optional colour system based on video signals.● For AV input■ 3D-COMBMakes still or slow moving pictures more vivid.Occasionally, while viewing still or slow moving pictures,colour patterning may be seen. Set to [On] to displaysharper and more accurate colours.● For PAL / NTSC signal reception in TV mode or fromcomposite.Screen Settings■ 16:9 OverscanSelects the screen area displaying the image for 16:9aspect.[On]: Enlarges the image to hide the edge of the image.[Off]: Displays the image in the original size.● Set to [On] if noise occurs on the edge of the screen.● This function can be memorised for SD (Standarddefinition) and HD (High definition) signals respectively.■ H-SizeSwitches over horizontal scanning size.■ Screen DisplayTurns off / on the TV screen without turning off the TV.● Sound is active even when the screen is off.● Press any buttons (except Standby) to turn the screen on.Copy AdjustmentCopies picture adjustments to other inputs. [OptionSettings] and [Screen Settings] are not copied.■ [Destination Viewing Mode]Sets the viewing mode for the destination input [TrueCinema] / [Custom].■ [Destination Input]Selects the destination input.■ [Copy Start]Select [Yes] to start copying.● For Analogue TV only.SoundModeSelects your favourite sound mode.● The selected mode affects all input signals.[Standard]: Provides the suitable sound quality for alltypes of scenes.[Music]: Improves sound quality for watching musicvideos, etc.