Panasonic TH-60A430H Operating Instructions Manual

Panasonic TH-60A430H Operating Instructions Manual Manual pdf 18 page image

18 EnglishTechnicalInformationAspectChange the aspect ratio (image size)[16:9]: Directly displays the image at 16:9 withoutdistortion (anamorphic).[14:9]: Displays the image at the standard 14:9 withoutdistortion.[Just]: Displays a 4:3 image full-screen. Stretching isonly noticeable at the left and right edges.[4:3]: Displays the image at the standard 4:3 withoutdistortion.[Zoom]: Displays a 16:9 letterbox or 4:3 image withoutdistortion.[4:3 Full]: Displays a 4:3 image enlarged horizontally tofit the screen.● For HD (High definition) signals[Sidecut Just]: Displays a 16:9 letterbox (anamorphic)image fullscreen. Stretching is only noticeable at the leftand right edges.● For HD (High definition) signals[Sidecut Zoom]: Displays a 16:9 letterbox (anamorphic)image fullscreen without distortion.● For HD (High definition) signalsInformation bannerDisplay Information banner● Also appears when changing a channel.4BBC4520:00 - 20:55Coronation Street 20:35All Digital ChannelsExample: Digital TV1 2 3 5 64InfoNow*1 Channel position and name2 Encrypted channel ( ) / TV mode ( , )3 Programme4 Programme Start / Finish time (Digital TV)Channel number, etc. (Analogue TV)5 Category6 Current time*Features available / Message meaningsSound mute on[Bad signal] Poor TV signal quality[Dolby D],[HE-AAC]Dolby Digital or HE-AAC audio trackSubtitle service availableMultiple image or audio availableTeletext service available, , , Audio mode1 - 90 Off Timer remaining time■ If multiple recorders or players areconnectedThe number is given from the TV’s lower number ofHDMI terminal connected to the same type equipment.For example, two recorders to HDMI1 and HDMI2,the recorder connected to HDMI1 is displayed as[Recorder1], and the recorder connected to HDMI2 isdisplayed as [Recorder2].VIERA Link MenuVIERA Link ControlSpeaker Selection Home CinemaRecorder2[Recorder1-3 / Player1-3]Recorder2■ If you access non-VIERA Link equipmentThe type of the connected equipment is displayed.Although you can access the connected equipment, youcannot operate it. Use its own remote control to operatethe equipment.Speaker SelectionYou can control the theatre speaker with this TV remotecontrol pointing at the TV’s signal receiver.● If you cannot operate, check the settings and theequipment.1 Display [VIERA TOOLS] and select [VIERA Link]VIERATOOLSPHOTO VIDEO MUSIC ECO NAVIGATIONVIERA Link2 Select [Speaker Selection]VIERA Link MenuVIERA Link ControlSpeaker Selection Home CinemaRecorder3 Set to [Home Cinema] or [TV][Home Cinema]: The sound is from theatre speakers.Player theatre, Blu-ray Disc theatre or Amplifier will beautomatically turned on if it is in Standby mode.● Volume up / downVOL● Mute● The sound of TV speakers is mute. When theequipment is turned off, TV speakers will be active.[TV]: TV speakers are active.■ Multi-channel soundIf you want to enjoy the multi-channel sound (e.g. DolbyDigital 5.1ch) via an Amplifier, connect it with an HDMIcable and optical digital audio cable and then select[Home Cinema]. If your Amplifier has “HDAVI Control 5”function, you only need to connect it with an HDMI cableto the TV’s HDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from the DIGARecorder to the Amplifier.