381/2PCOFFSTANDBY SAVE OFFPOWER MANAGEMENT OFFAUTO POWER OFF OFFOSD LANGUAGE ENGLISH (US)COMPONENT/RGB-IN SELECTRGBINPUT LABELSIGNALPOWER SAVESET UPSYNCVIDEO NRSIGNALAUTOH-FREQ.V-FREQ.kHzHz33.860.0[ RGB ]3 : 2 PULLDOWN OFFOFFSYNC AUTOSYNC ON GSYNC VBSH-FREQ.V-FREQ.kHzHz33.860.03D Y/C FILTER (NTSC)COLOR SYSTEMSIGNALAUTO3 : 2 PULLDOWNPanasonic AUTO (4 : 3)OFFREFRESH RATE 100 HzNORMAL[ VIDEO ]VIDEO NR OFFSYNCVIDEO NRSIGNALAUTOH-FREQ.V-FREQ.kHzHz33.860.0[ RGB ]3 : 2 PULLDOWN OFFREFRESH RATE 100 HzOFF3 : 2 PULLDOWNVIDEO NRSIGNALOFFREFRESH RATE 100 HzOFF[ COMPONENT ]3 : 2 PULLDOWNVIDEO NRSIGNALOFFREFRESH RATE 100 HzOFFH-FREQ.V-FREQ.kHzHz33.860.0[ Digital ]SET UP for Input SignalsSelect SIGNAL from the “SET UP” menu during RGB input signal.Press to adjust.Press to exit from adjust mode.SYNCSetting RGB sync signalConfi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUTsignal).AUTO:The H and V sync or synchronized signal are automatically selected. If bothinput, it is selected the H and V sync.ON G: Uses a synchronized signal on the Video G signal, which is input from theG connector.VBS: Uses a synchronized signal of Composite Sync input, which is input fromthe HD connector.Displays the H (Horizontal) / V (Vertical) frequencies.This display is valid only for RGB/PC and Digital input signal.Display range:Horizontal 15 - 110 kHzVertical 48 - 120 HzH-FREQ. (kHz) / V-FREQ. (Hz)12 Press ACTION ( ) buttonREFRESH RATEPress to select REFRESH RATE.Press to adjust.Press to exit from adjust mode.This function sets the refresh rate of the display.This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.100 Hz: Reduce screen fl icker.50 Hz: Enhance the resolution of moving images.Note:It is recommended to set to 100 Hz normally.12