Panasonic TH-50PH10UKA Operating Instructions Manual

Also see for TH-58PH10UKA - 58" Plasma Panel: Operating instructions manual Manual de instrucciones Manual

Panasonic TH-50PH10UKA Operating Instructions Manual Manual pdf 13 page image

13INPUT MENU ENTER/+ /VOL-/TH-42PWD8English (UK)DeutschFrançaisItalianoEspañolENGLISH (US)РусскийOSD LANGUAGESETSELECTWhen the POWER is turned on for the firsttime, the LANGUAGE selection screen isdisplayed.From the second time on, language selectioncan be done from the setup menu. (seepage 18)Select the desired language using the orbutton and press the ACTION ( ) button.Note:Set with the remote control. Buttons on themain unit are unavailable for this setting.From the second time on, the screenshown below is displayed for a while(setting condition is an example).PCFULLConnecting the plug to the Wall OutletNote:When disconnecting the AC cord, be absolutely sure to disconnectthe AC cord plug at the socket outlet first.Press the Power switch on the Plasma Display to turn the seton: Power-On.Power Indicator: GreenExample: The screen below is displayed for a while after thePlasma Display is turned on. (setting condition is anexample.)Connecting the AC cord plug to the Plasma Display.Fix the AC cord plug securely to the Plasma Display.(see page 9)Power IndicatorRemote ControlSensorPress the button on the remote control to turn the Plasma Display off.Power Indicator: Red (standby)Press the button on the remote control to turn the Plasma Display on.Power Indicator: GreenTurn the power to the Plasma Display off by pressing the switch on the unit,when the Plasma Display is on or in standby mode.Note:During operation of the power management function, the power indicator turnsorange in the power off state.Power ON / OFF