Panasonic TH-50PH10UKA Operating Instructions Manual

Also see for TH-58PH10UKA - 58" Plasma Panel: Operating instructions manual Manual de instrucciones Manual

Panasonic TH-50PH10UKA Operating Instructions Manual Manual pdf 24 page image

24PICTURE AdjustmentsADVANCED SETTINGSNotes:• “COLOR” and “TINT” settings cannot beadjusted for “RGB/PC” and “Digital” inputsignal.• You can change the level of each function(PICTURE, BRIGHTNESS, COLOR, TINT,SHARPNESS) for each PICTURE MENU.• The setting details for STANDARD,DYNAMIC and CINEMA respectivelyare memorized separately for each inputterminal.• The “TINT” setting can be adjustedfor NTSC signal only during “VIDEO(S VIDEO)” input signal.• In PICTURE, there is not a noticeablechange even when contrast is increasedwith a bright picture or reduced with a darkpicture.On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed atany time or the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to thefactory settings.Helpful Hint ( / NORMALIZE Normalization)Item Effect AdjustmentsPICTURE Less More Adjusts the proper picture contrast.BRIGHTNESS Darker BrighterAdjusts for easier viewing of darkpictures such as night scenes andblack hair.COLOR Less More Adjusts color saturation.TINT Reddish Greenish Adjusts for natural flesh tones.SHARPNESS Less More Adjusts picture sharpness.Item Effect DetailsBLACKEXTENSION Less More Adjusts the dark shades of the image in gradation.INPUTLEVEL Less MoreAdjustment of parts which are extremely bright and hard to see.(This cannot be adjusted when the input signal is Digital.)GAMMA Down Up S CURVE 2.0 2.2 2.5AGC OFF ON Increases the brightness of dark signal automatically.W/B HIGH R Less More Adjusts the white balance for light red areas.W/B HIGH G Less More Adjusts the white balance for light green areas.W/B HIGH B Less More Adjusts the white balance for light blue areas.W/B LOW R Less More Adjusts the white balance for dark red areas.W/B LOW G Less More Adjusts the white balance for dark green areas.W/B LOW B Less More Adjusts the white balance for dark blue areas.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.