Panasonic TH-50LFB70E Operating Instructions Manual

Also see for TH-50LFB70E: Operating instructions Operating instructions

Contents

Panasonic TH-50LFB70E Operating Instructions Manual Manual pdf 14 page image

14EnglishINPUTMENUVOLENTER/+ /- /Basic ControlsMENU Screen ON / OFFEach time the MENU button is pressed, the menu screen will switch.Volume AdjustmentVolume Up “+” Down “–”When the menu screen is displayed:“+” : press to move the cursor up“–” : press to move the cursor downRemote controlsensorMain Power On / Off SwitchBrightness SensorDetects the brightness in the viewing environment.Main Unit Power IndicatorThe Power Indicator will light.• Power-OFF .... Indicator not illuminated (The unit will stillconsume some power as long as the powercord is still inserted into the wall outlet.)• Standby ........ RedOrange (When “Slot power” is set to “On”and Terminal Board is installed.)Orange (Depending on the type of the function boardinstalled, when the power is supplied to the slot)Orange (When “Control I/F Select” is set to “DIGITALLINK/LAN” or “Wireless Network Standby” is set to “On”.Refer to “Operating Instructions, Network Operations”)Orange (When “Quick Launch” is set to “On”.)• Power-ON ...... Green• HDMI1 Power managementHDMI2 Power management......................... Orange (With HDMI1 or HDMI2 input signal.)* These functions are not supported by TH-50LFB70E and TH-65LFB70E.• PC Power management (DPMS)......................... Orange (With PC input signal.)• DVI-D Power management......................... Orange (With DVI input signal.)Note:If the power indicator is orange, power consumption during standbyis generally larger than that of when the power indicator is red.Enter / Aspect buttonINPUT button (INPUT signal selection)SLOT: Terminal board (optional accessories) insertslot (see page 3)Note:The right side slot is for terminal board with 2-slotwidth. The terminal board with 1-slot width does notfunction when installed in the right side slot.Touch panel IR transmission partInstalled on the four sides of the display panel.USB (VIEWER): Connect to USB memory.USB (TOUCH): When using the “WhiteBoardSoftware” from the supplied CD-ROM,connect the computer via USB cable.