SetDay MON18:00TimeDay/Time SettingsTime MON 99:99SetDay TUE18:00TimeDay/Time SettingsTime TUE 99:99OSD LanguageEnglish (UK)DeutschFrançaisItalianoEspañolENGLISH (US)Русский13EnglishPower On / OffWhen fi rst switching on the unitFollowing screen will be displayed when the unit is turned on for the first time.Use the remote control to make the settings. Pressing the buttons on the main unit or multi-touch operation willnot work.Notes:• Once the items are set, the screens won't be displayed when switching on the unit next time.• After the setting, the items can be changed in the following menus.OSD LanguageDay/Time SettingsPower ON messageThe following message may be displayed when turning the unit power ON:No activity power off Precautions’No activity power off’ is enabled.If “No activity power off” in Setup menu is set to “Enable”, a warning message is displayed every time thepower is turned ON.Power Management InformationLast turn off due to 'Power management'.If “Power management” is functioned, an information message is displayed every time the power is turned ON.These message displays can be set with the following menu: Options menuPower On Message (No activity power off)Power On Message (Power Management)OSD Language Day/Time Settings1 Select thelanguage.2 Set.1 Select “Day”or “Time”.2 Setup “Day”or “Time”.1 Select “Set”.2 Set.WhiteBoard Startup screenNow Loading...WhiteBoardWhen the power is turned ON with the Input switch of the WHITEBOARD, the built-in WhiteBoard starts up.Touch screen connection status displayWhen not connected to a computer via USBInitializing Touch Screen...When connected to a computer via USBTouch Screen connected to external device.Touch Screen detected.Touch operation of the display is possible after thismessage appears.